Tar Products

Product Details:

 Bituminous paint is also known as bitumen paint, is a type of bituminous coating product that provides weatherproofing and corrosion resistance to the elements. ... A bituminous coating is used to build a vapour-proof and protective coat in accordance with its formulation and polymerization grade. The bituminous coating is also known as asphalt coating.

Product Details:

This is a polymer-based gasket used in building and construction design applications to fill and protect joints between two substrates. It is used to seal joints, gaps and openings between two or more substrates to prevent environmental elements that provide conditions that may lead to corrosion.

Product Details:

Bitumen primer is commonly used for priming concrete and masonry surfaces prior to the application of the first mopping coat of melted bitumen in laying built-up roofing or membrane waterproofing, so as to promote the bonding of the bitumen with the concrete roof deck or masonry surface.

Product Details:

A coal tar epoxy is a black surface protection polymer used on surfaces subjected to extremely corrosive environments. It is a blend of various epoxy resins and coal tar.
The epoxy service lifetime is approximately to 20-30 years.It is commonly used to make high solids coatings or paints to provide moisture protection for underground systems like pipelines, water treatment facilities, clarifiers and tanks; it is further used in the sewage industry and for prevention from microorganisms.

Product Details:

ShaliPoxy® CTE 53/103/203/303/503 is a two-component, epoxy resin system modified with coal tar. The combination of epoxy resin with coal tar enables the product to use as a high performance protective coating for steel and concrete surfaces. It can be used direct to metal (DTM) application, without any requirement of primer. The coating is capable of giving 50/100/200/300 or 500 Microns DFT in single coat when applied wet-on-wet basis as per recommended coverage.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 dayas
• Packaging Details: 15ltr base and 5ltr hardener

Product Details:

A steel primer recommended for exterior and interior surfaces subjected to humidity, condensation and industrial environments in general. It can be overcoated with conventional synthetic top coats as well as aluminium paints.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 DAYS

Product Details:

Once the concreting of stub columns has been completed. Give time for the concrete to dry completely and apply at least two coats of black japan for both footing and stub columns. black japan helps in absorbing moisture due to the soil to prevent seepage into the substructure concrete.Black Japan is affordable  Black color paint used to prevent metal from rusting.

Additional Information:

• Item Code: 2715
• Production Capacity: 2000ltr
• Delivery Time: 3 days
• Packaging Details: 20 litre drum

Product Details:

available in the form of putty which forms a smooth and homogeneous paste for sealing of porous concrete, masonary floors, wall, roof and vertical joints between plates, folded sections, wooden joints, etc.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 days

Product Details:

Cold applied liquid protective coating for • Underground metal storage tanks for diesel, petrol and other liquid / gas. • Other buried / submerged surface or equipment. • Interior / exterior surfaces of metal or concrete tanks, culverts, steel / wood pilings, filter screens, sluice gates, tank bases, trestles etc. • Interior / exterior of barges and under-water structures

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 days

Product Details:

A high build epoxy polyamide combined with coal tar that has:
• Compatibility with cathodic protection.
• Outstanding resistance to fresh water and salt water.
• Good wear properties.
• Excellent resistance to chemical•
Protection of steel/concrete pipelines, harbour and shore installations. • Anti-corrosive coating for submerged or semi-submerged areas e.g. piling, jetties, dock gates.
• Internal tank lining for crude oil storage tanks.ly polluted water (e.g. sewage).

Additional Information:

• Item Code: epilux5
• Production Capacity: 2000
• Delivery Time: 3 to 5 days
• Packaging Details: dual pack

Product Details:

Coal tar coatings have a low permeability to moisture (water), high dielectric resistance, good anti-fouling properties and they are resistant to barnacles. All these properties contribute to their good corrosion resistance and performance in marine environment.

Additional Information:

• Production Capacity: 2000

Product Details:

ShaliPrime® SSC is a solvent-based Coal Tar primer that seals pores in surfaces such as concrete and improves adhesion of coal tar sealants to substrate.
ShaliPrime® SSC is applied in canal lining gaps and concrete floor joints prior to pouring of the ShaliJet Sealing Compound for bonding of the Coal Tar Sealant to the gaps. It is used for priming before application of ShaliMark road marking paint over PQC pavements.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 days

Product Details:

• asian epoxy coal Tar is supplied in two packs. Stir the base and hardener separately. if settling is observed in
the base or hardener, loosen the settled material with the help of hand stirrer followed by power driven stirrer (at
lower rPM) for quick homogenous mixing.
• Mix hardener gradually into the base under continuous stirring as per the mixing ratio. once the unit has been
mixed, it should be consumed within the working pot life. in case of part mixing (which should be avoided), close
the lids of containers tightly to avoid contact with atmospheric moisture.
• Thinner should be added after mixing the components and post the induction time. addition of excessive thinner
will lead to reduced sag resistance

Additional Information:

• Production Capacity: 200
• Delivery Time: 3 to 5 days

Product Details:

TankMastic is a specially formulated anti-corrosive, tasteless, odourless, non-toxic and blackbituminous coating for protecting the internal surface of storage water tanks, pipes, etc.
 
 
 

Product Details:

This is a polymer-based gasket used in building and construction design applications to fill and protect joints between two substrates. It is used to seal joints, gaps and openings between two or more substrates to prevent environmental elements that provide conditions that may lead to corrosion.

Product Details:

STP Coloured Asphalt is a synthetic binder developed for use in the production of Coloured Asphalt by hot mix process. The binder is polymer modified making it an ideally strong and flexible binder for high performance asphalt. STP Coloured Asphalt can be designed to meet specific purpose and to provide a strong and durable coloured pavement solution. STP Coloured Asphalt is available in Yellow, Red & Green colour. Other colours may be produced

Additional Information:

• Production Capacity: 20000
• Delivery Time: 7 days

Product Details:

Bituminous paint is also known as bitumen paint, is a type of bituminous coating product that provides weatherproofing and corrosion resistance to the elements. ... A bituminous coating is used to build a vapour-proof and protective coat in accordance with its formulation and polymerization grade. The bituminous coating is also known as asphalt coating.

Product Details:

The bitumen grade 85/25 means the softening point is 85°c and penetration is 25 desi millimeter is produced in compliance and conformity with ASTM standard

Product Details:

TarPlastic® is a cold applied bituminous caulking compound with mineral fillers in a volatile solvent to retain its plasticity. It is available in a putty form. TarPlastic® remains plastic for a considerable length of time. The skin and interior harden to some extent after application.
IS Grade 1580

Product Details:

Bitumen Adhesive is a premium cold-applied, high strength bituminous based adhesive sealant designed for the application and repair of SBS modified bitumen single-ply membranes and bituminous single-ply membranes. When properly utilized this product adheres the membrane and seals the laps to prevent water intrusion.Eliminates the need for torches and kettles

Excellent cure

Tough, flexible, adhesive and cohesive film

Excellent water and weather resistance

Excellent general adhesive

Excellent lap cement

Good U.V. resistance

Easy to apply

Elastomeric, moves with substrate

Additional Information:

• Production Capacity: 2000
• Delivery Time: 3 days

Product Details:

Bitumen-polymer membranes and liquid membranes are used for roof protection, to waterproof terraces, ground walls, sanitary rooms, parking lots, civil and industrial surfaces, and so on. All of the above said applications have the same goal: to create an effective barrier to water and rising damp.

They can also be used to maintain and restructure the old waterproofing layers and structure, which are subject to the effects of time, and the aggressive action of atmospheric agents and pollution, when talking about roofs and outdoor places.

Additional Information:

• Production Capacity: 3000
• Delivery Time: 3 days
• Packaging Details: plastic bucket

Product Details:

ShaliBond® APP is synthetic rubberized adhesive for fixing APP membrane, thus making it a virtual self adhesive. ShaliBond® APP has superior bond and high flexibility to accommodate natural expansion and contraction.

Product Details:

The bitumen grade 90/15 means the softening point is 90°c and penetration is 15 desi millimeter is produced in compliance and conformity with ASTM standard.
 Oxidized bitumen 90/15 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, insulating and impregnating agent, make rubber and plastic products.

Product Details:

Liquid-applied membrane (LAM) is a monolithic, fully-bonded, liquid-based coating suitable for many waterproofing and roofing applications. The coating cures to form a rubber-like elastomeric waterproof membrane and may be applied over many substrates, including asphalt, bitumen and concrete.
Liquid-Applied Membrane Is a Popular Choice Because It Is...Ideal for exposed roofs with large number of complicated details and penetrationsCost-effective, especially for roof renovations and roof repair projectsSeamless, fills in cracks, gaps and voids in substrateEasy and safe applicationDurableRapid curing and excellent adhesion to all kinds of surfacesApplicable for a multitude of waterproofing needs, not only roofs
Benefits and Features

• Fast, easy and safe application Liquid-applied
• Extend life cycle of old or leaking roofs without interruption
• Suitable for various types of structures and substrates
• Many possible applications, for roofs, roads, bridges, basements, terraces and more Versatile
• Lower risk of roof failure even in cold climate and longer life expectancy
• Highly elastic
• Seamless
• Fully adhered to substrate
• High UV resistance
• Retains flexibility even at low temperatures
• Safety
• Reduced fire risk Zero flame technology
• Entrapped moisture can evaporate, no blistering Vapor permeable
• Design freedom with more possible applications
• Variety of color options
• Improved energy efficiency for cool roofs and solar roofs High solar reflectance index when applied in white color